OneLam 400 A3
95 €
incl. VAT
- Free EU shipping on orders over €95
- Official retailer of all brands carried
- Customer service at your disposal
- TrustScore 4,6
A cutting ruler, corner scraper, and a 15-piece startup set consisting of three A4, four A5, four A6, and four business card pages are included so that you can start your laminating project immediately. The ruler and scraper can be stored in a convenient compartment under the unit so that you always have the accessories at hand.
With a speed of 400 millimeters per minute, the HP OneLam 400 A3 laminates an A3 document in about 60 seconds. The machine also has a lever for roll release: if you have inserted the film into the machine at an angle, this may cause the film to get stuck. After unlocking, the laminating film can be gently released from the input side.
If you forget to turn off the device via the main power switch, the heating process stops after 30 minutes, and the laminator switches to standby mode.
Application Area: Hobby needs and workplace
Lamination Format: Up to A3
Heating Time: 2-4 minutes for 80 microns
Film Thickness: 75/80 up to 125 microns or 0.5 mm thickness
Use: Hot and cold lamination
Lamination Speed: 400 mm per minute
Temperature: 120 - 150 degrees Celsius
Heating System: 2 rolls heat up from the inside
Input Width: 330 mm
Function Button: On/Off, 75/80 microns, 125 microns, cold
Temperature Controlled: Each film thickness has its own temperature
Automatic Standby Mode: After 30 minutes
ABS Function: Roll release lever
Size: 46 cm wide, 8.6 cm high, 14 cm deep
Weight: 1.77 kg
Article nr: 130739